Series 9 Bench Style Pneumatic Roll Marking Machine - Compact and economical, the Series 9 roll marker features a smooth .5" downward ram stroke and 3.5" of maximum cross slide motion. With a 1.4 ton pressure capacity, it is best suited for marking round parts up to 3" in diameter and rectangular parts up to 3" high. The Series 9 also features pneumatically powered anti-tie down dual hand controls. In addition, the machine can function as a squeeze press with the flip of a switch.

Series 12

The Series 12 combines 3 tons of marking pressure and the advantage of pneumatic power into a compact floor mounted machine.

This economical general purpose marker has the capability of roll form marking your round or flat parts, as well as acting like a press marker. The benefit of roll marking is that the characters are applied one at a time. This reduces marking pressure and allows the Series 12 to apply up to 4 lines of 1/8" characters per line of information in a single roll marking cycle. When operated in the press mode, 4 - 1/8" characters can be applied.

Tooling for either roll or press marking is available in most cases from stock at Schmidt.

To roll mark flat parts a round type holder is required, and to roll mark round parts a roller bearing cradle and a straight type holder is necessary.

The pneumatic operation of the Series 12 means quiet, smooth, and trouble-free operation. No electrical connections are required - even the anti-tie down dual hand controls have pneumatic controls.

A product information sheet on the Series 12 is available here.

Model 175-MPC, 575-MPC

Model 175-MPC Hydraulic Roll Marking Machines - For larger marking requirements and higher production, the Model 175-MPC and 575-MPC are recognized as the finest machines in the marking industry. These robust roll markers have maximum pressure capacities of 7 and 14 tons respectively with self-contained hydraulic units. Schmidt can provide standard and customized feeding systems. Microprocessor controls provide up to date technology with greater reliability and diagnostic capability.

Model 377, 477, 577

Model 377, 477 and 577 Hydraulic Marking Machines - For in-line production or marking of unusually large part sizes, Schmidt offers 4, 6, and 12 ton marking systems with 1" of vertical movement. These machines are available with remote hydraulic units and horizontal cross slide strokes of 3.5" on the Model 377 and 7" on the Model 477 and 577. Depending on the application requirement, the marking heads can be mounted in a vertical or horizontal position.