GTS home. Schmidt Marking Systems, marking machine, marking tools, dies, laser engraving machines, roll marking machines, press marking machines and accessories.    

  HotLinks      

Schmidt Hi-loy Steel Stamps (Hand Stamps)

 

Schmidt Hi-loy brand hand stamps are produced from selected tool steel using our proprietary (in-house) heat treating method for safety and durability. Our rigid heat treat specifications ensure that the heads will not split or spall, the shanks will not bend and the characters will remain sharp and clean. It is
				  not uncommon to find Schmidt steel hand stamps in service for
				  more than 20 years.  

Hi-Loy Steel Letter and Figure Hand Stamps

Schmidt Hi-loy brand steel stamps are produced from selected tool steel using our proprietary (in-house) heat treating method for safety and durability. Our rigid heat treat specifications ensure

that the heads will not split or spall, the shanks will not bend and the characters will remain sharp and clean. It is not uncommon to find Schmidt steel hand stamps in service for more than 20 years.

These steel stamps produce a crisp, clear impression in materials up to 35Rc hardness.

Letters and figures (numbers) are available from stock in sizes ranging from 1/16" through 1/2" in sharp face.

Ordering information:

Select the desired character size and the corresponding Schmidt stock number from the chart below and advise which standard character, figure or letter set you require.

Standard steel hand stamp characters are A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 0 (in hand stamps, the "6" and "9" are interchangeable). All letters are upper case only.

Character size
Stock No.
Blank size
(square x length)
1/16"
032665
5/16" x 2-7/8"
3/32"
032666
5/16" x 2-7/8"
1/8"
032667
5/16" x 2-7/8"
5/32"
032668
3/8" x 3"
3/16"
032669
3/8" x 3"
1/4"
032670
3/8" x 3"
5/16"
032671
1/2" x 3-1/4"
3/8"
032672
5/8" x 3-1/2"
1/2"
032673
3/4" x 3-1/2"

Figure sets consist of nine stamps, 1 2 3 4 5 6 7 8 0 (the 6 is also used as the 9) and a hardwood case.

Letter sets consist of 27 stamps, - A B C D E F G H I J K L M N O P Q R S T U V W X Y Z & - and a hardwood case.

All sizes listed above are normal shelf stock items in all Schmidt locations.

 

Inspection code hand stamps and production control

Simplify parts control problems with our inspection code steel stamps. These steel hand stamps can provide on the spot information on the kind of material, heat

  Simplify parts control problems with our inspection code steel stamps. These stamps can provide on the spot information on the kind of material, heat number, lot number, shift, or date of manufacture. They can also be used to identify the machine operator, welder, assembler or inspector.

number, lot number, shift, or date of manufacture. They can also be used to identify the machine operator, welder, assembler or inspector.

The complete "Marking Tool Guide" is available here.

Select from 300 standard code designs (available in the marking tool guide or by following this link - 300 code design chart).

shown from top to bottom: Scribeliner for marking automotive truck frames, model 4 nameplate detail press, MicroLase laser marking system, model 175-MPC roll marking machine and a Styliner hand held dot matrix marker.  
 
 
 

Please call us @ 1.800.593.7774, or use the contact page to request additional information regarding steel stamps, hand stamps and our other manual marking tools.

 
 

©2007 Schmidt Marking Systems
modified June 26, 2006
               
                 
go directly to laser marking go directly to pin marking go directly to scribe marking go directly to nameplate markers and nameplate marking